一個繼電器支持手動復位和自動復位
報警前監控模式
緊湊型殼體
耐高頻噪聲
符合全球電源和安全標準
Omron K8AK 系列監控繼電器經過專業設計，可精確和可靠地監控工業設施和設備。K8AK-VW/VS 繼電器特別適用于監控過電壓和欠電壓， K8AK-VW 可同時進行。
? Monitors over and under voltages simultaneously.
? Separate settings and outputs supported for over and under voltages.
? Manual reset and auto resetting supported by 1 relay.
? Pre-alarm monitoring mode.
? Two SPDT output relay. 5 A at 250 V ac (resistive load)
? LED output status indicator.
? Process control signal (0 to 10 V) current splitter input supported.
? Input frequency 40 Hz to 500 Hz
? Inputs isolated from the power supply
? Monitoring Relay.
? Power supply 24 V ac/dc.
? Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac/dc.
? Power supply (isolated) 24 V ac/dc, 100 to 240 V ac.
? Manual/ Automatic reset (switchable)
? Manual reset – Turn OFF the power supply for minimum of 1 sec.
? Power on lock time 1 s or 5 s (using DIP switch)
? Green LED Power (PWR)
? Yellow LED Relay output (RY)
? Red LED Relay output (ALM)
? Two SPDT relays normally closed (NC) using DIP switch
? DIN Rail Mounted
? Weight 150 g
? Case material PC and ABS, UL 94 V-0
? Colour N1.5
? Protection IP20 (terminals)
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
? Motor protection relays
? Temperature monitoring relays
? Water level control relays
? Voltage
? Current
UL 60947-5-1, UL 508, IP 20
| 屬性 | 數值 |
|---|---|
| 監測應用 | 電壓 |
| 觸點配置 | 單刀雙擲 |
| 電壓靈敏度 | 過壓，欠壓 |
| 電氣相位 | 1 |
| 電壓感應距離 | 1 → 10 v 交流 / 直流、 15 → 150 v 交流 / 直流、 3 → 30V 交流/直流 |
| 延時 | 0.1 → 30.s |
| 系列 | K8AK-VW |
