J 類熔斷器
真正雙元件熔絲,在 500% 過載時具有至少 10 秒的延時
雙元件結構可減少功率損耗并使運行溫度更低
高斷開容量: 300kA
額定電壓 600V 交流
由于對短路的快速響應,因此具有高電流限制
獨特的尺寸可確保不同的熔斷器不能被替換
庫存號 513-0623 和 513-0718 具有插片接線端子
UL 248-8 J 類
UL 認可;CSA 認證
Use this cartridge fuse from the Eaton Bussman range to protect your electrical loads from the hazardous effects of short circuits and overcurrents. As a T-speed fuse, it's slow-acting and can accommodate voltage and current surges for a short period. This means it's especially useful for appliances needing a high starting current. Ceramic housing gives it a high breaking capacity of 10kA at 300V to make it practical for high-current applications. With compact dimensions of 21 (diameter) x 57mm (length) this fuse is a good choice for busy setups where space is limited.
? Can be used for both AC and DC supply voltages for versatility
? Dual element construction to minimise power loss and enable cooler running
? Compatible with an indicator for easy diagnosis and troubleshooting
? Voltage rating of 600V AC for use in low-voltage applications
The breaking capacity of a fuse is the amount of current it can safely handle before it breaks or melts and disrupts the flow of power in your circuit.
Eaton formerly known as Eaton Bussmann
美國標準熔絲管,包括快熔式小型和雙元件延時類型
屬性 | 數值 |
---|---|
額定電流 | 10 A |
熔斷器尺寸 | 21 x 57mm |
熔斷器速度 | T |
額定電壓 | 300 V dc, 600 V ac |
總尺寸 | 21 x 57mm |
UL 類 | UL 248 |
系列 | Bussmann |