The Vishay linear optocoupler consists of an AlGaAs infrared emitter irradiating an output PIN photodiode and a feedback photodiode. The feedback photodiode captures a percentage of the emitter’s flux and generates a control signal (IP1) that can be used to keep the emitter output constant by adjusting the emitter forward current. This compensates for the emitter’s non-linear, time, and temperature characteristics. The output PIN photodiode produces an output signal (IP2) that is linearly related to the servo optical flux created by the emitter.
Couples AC and DC signals
Low input-output capacitance
Internal insulation distance, > 0.4 mm
| 屬性 | 數值 |
|---|---|
| 安裝類型 | 通孔安裝 |
| 輸出設備 | 光電二極管 |
| 最大正向電壓 | 1.5V |
| 通道數目 | 1 |
| 針數目 | 8 |
