發布日期：2022-10-09 點擊率：65
Applications: Process control equipment, Weighing calibration tool, Robotics and effectors, Ball bearing torque measurement, Laboratory and Research
Industries: General Industry
Description: The CS1210 Series has been developed to measure torque in static applications. It offers high operating ranges up to 8,000 lbf-ft. The mechanical design and gauge placement minimizes transverse effects. Fitted with metallic strain gauges in a Wheatstone bridge circuit, the CS1210 is providing excellent temperature stability. For high-level output a model with integrated amplifier is available. With many years of experience as a designer and manufacturer of sensors, Measurement Specialties often works with customers to design or customize sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.
Features:
Ranges from ±160 to ±10,000 Nm (±128 to ±8,000 Lbf-ft)
For Static Applications
High Stiffness
Collar Mechanical Fittings
High Level Output Model with Integrated Amplifier
典型應用: 過程控制設備，稱重校準工具，機器人和執行器，滾珠軸承扭矩測量，實驗室和研究
行業: 工業控制
產品描述:
CS1210系列扭矩傳感器主要用來測量靜態扭矩，最大量程為8000lbf-ft。特殊的機械設計和應變片位置有效的降低了橫向效應。金屬應變片組成的惠斯通電橋提供優異的溫度穩定性，可選放大輸出。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。
特點:
量程：±160Nm ~ ±10000Nm（±128Lbf-ft ~ ±8000Lbf-ft）
靜態應用
高硬度
柱環式機械連接
可選放大輸出
CS1210系列扭矩傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/559.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
下一篇： PLC、DCS、FCS三大控
上一篇： KMT32B角位傳感器中英
